The Elliptika_IoT modular boardis our latest development board, based on a pycom module that includes the ESP32 module from Espressif, designed for IoT projects. The card is Plug and play with any sensor directly connected to the card. With the Elliptika_IoT modular board, development becomes fast, flexible and with ultra-low energy consumption.
Characteristics
– USB – 1x Micro USB port: USB serial port to UART.
– Built-in LiPo battery charger to charge your battery.
– Alimentation – 3.3 to 5v
– LORA_antenna with operating frequency of 868 MHz
– Wifi_antenna with operating frequency of 2.4 / 5GHz
– Voltage Regulator
– LED for charging and for debugging
– UART Interface
– I2C Interface
– SPI Interface
Switch: battery charge or card power
– Dimensions 95mm * 56mm